| Video |
|---|
| Routing | 4 x 2 matrix |
| Gain | Unity |
| Bandwidth | 300 MHz (-3dB), fully loaded |
| 0 - 10 MHz: no more than +0.1dB to -0.1dB |
| 0 - 130 MHz: no more than +4dB to -0.1dB |
| Crosstalk | -55dB @ 10 MHz, -45dB @ 30 MHz, -30dB @ 100 MHz |
| Switching speed | 200 ns (max.) |
| Video input |
|---|
| Number/signal type | 4 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, |
| composite video |
| Connectors | 4 x 5 BNC female |
| Nominal level | 1V p-p for Y of component video and S-video, and for composite video |
| 0.7V p-p for RGB |
| 0.3V p-p for R-Y and B-Y of component video, and for C of S-video |
| Minimum/maximum levels | Analog: 0.5V to 2.0V p-p |
| Impedance | 75 ohms |
| Return loss | <-30dB @ 5 MHz |
| Maximum DC offset | 1.5V |
| Video output |
|---|
| Number/signal type | 2 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, |
| composite video |
| Connectors | 2 x 5 BNC female |
| Nominal level | 1V p-p for Y of component video and S-video, and for composite video |
| 0.7V p-p for RGB |
| 0.3V p-p for R-Y and B-Y of component video, and for C of S-video |
| Minimum/maximum level | 2V p-p |
| Impedance | 75 ohms |
| Return loss | -30dB @ 5 MHz |
| DC offset | ±5mV maximum with input at 0 offset |
| Switching type | Triple-Action |
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB, RsGsBs |
| Output type | RGBHV, RGBS, RGsB, RsGsBs |
| Input level | 0.5V to 5.0V p-p,: 4.0V p-p normal |
| Output level | AGC to TTL: 4V to 5V p-p, unterminated |
| Input impedance | 75 or 510 ohms, switchable |
| Output impedance | 75 ohms |
| Polarity | Positive or negative (follows input) |
| Audio |
|---|
| Routing | 4 x 2 stereo matrix |
| Gain | Unbalanced output: -6dB; balanced output: 0dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05dB |
| THD + Noise | 0.03% @ 1 kHz at nominal level |
| S/N | >90dB, balanced, at rated maximum output (21dBu) |
| Crosstalk | <-80dB @ 1 kHz, fully loaded |
| Stereo channel separation | >90dB @ 1 kHz |
| CMRR | >75dB @: 20 Hz to 20 kHz |
| Audio input |
|---|
| Number/signal type | 4 stereo, balanced/unbalanced |
| Connectors | (4) 3.5 mm captive screw connectors, 5 pole |
| Impedance | >10 kohms unbalanced/balanced, DC coupled |
| Nominal level | -10dBV (316mV) |
| Maximum level | +19.5dBu, (balanced or unbalanced) at 1%THD+N |
| Input gain adjustment | -18dB to +24dB adjustable per input by RS-232 or front panel |
| Audio output |
|---|
| Number/signal type | 2 stereo, balanced/unbalanced |
| Connectors | (2) 3.5 mm captive screw connectors, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1dB channel to channel |
| Maximum level (Hi-Z) | >+21dBu, balanced or unbalanced at stated %THD+N |
| Maximum level (600 ohm) | >+15dBm, balanced or unbalanced at stated %THD+N |
| Control/remote — switcher |
|---|
| Serial control port | 1 RS-232, 9-pin female D connector |
| Baud rate and protocol | 9600, 8-bit, 1 stop bit, no parity |
| Serial control pin configurations | 2 = TX, 3 = RX, 5 = GND |
| Program control | Extron's control program for Windows® |
| Extron's Simple Instruction Set™ _ SIS™ |
| General |
|---|
| Power | 100VAC to 240VAC, 50/60 Hz, 40 watts, internal, auto-switchable |
| Temperature/humidity | Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing |
| Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing |
| Rack mount | Yes, with included parts |
| Enclosure type | Metal |
| Enclosure dimensions | 1.75" H x 17.5" W x 9.5" D: (1U high, full rack width) |
| (4.4 cm H x 44.5 cm W x 24.1 cm D) |
| (Depth excludes connectors.: Width excludes rack ears.) |
| Product weight | 4.9 lbs (2.2 kg) |
| Shipping weight | 8 lbs (3.6 kg) |
| DIM weight | |
| USA, Canada | 8 lbs (3.6 kg) |
| International | 9 lbs (4.1 kg) |
| Vibration | ISTA/NSTA 1A in carton (International Safe Transit Association) |
| Listings | UL, CUL |
| Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF | 30,000 hours |
| Warranty | 3 years parts and labor |
| (7.40-011003-D3) | |
)
Printable Version
