CrossPoint 84 Matrix Switchers
8x4 Wideband Matrix Switchers for RGBS, RGBHV, and/or Stereo Audio

The Extron CrossPoint 84 Matrix Switchers are 8x4 analog RGBHV matrix switchers.

PART NUMBERS
 CrossPoint 84HV 60-219-05
 CrossPoint 84HVA 60-219-06
  Click to view enlarged image.
Click to enlarge image
Printable Version

 Overview   Description   Features 
 Specifications 
 Diagram   Panel Drawing 
 

Video
Routing 84 Series: 8 x 4 matrix
88 Series: 8 x 8 matrix
124 Series: 12 x 4 matrix
128 Series: 12 x 8 matrix
168 Series: 16 x 8 matrix
1616 Series: 16 x 16 matrix
Gain Unity
Bandwidth 200 MHz (-3dB), fully loaded
0 - 10 MHz: no more than +0.1dB to -0.1dB
0 - 130 MHz: no more than +6dB to -0.8dB
Crosstalk -50dB @ 5 MHz, -45dB @ 10 MHz
Switching speed 200 ns(max.)
Video input
Number/signal type 8, 12, or 16 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video,
S-video, composite video
Connectors 84/88 Series: 8 x 5 BNC female
124/128 Series: 12 x 5 BNC female
168/1616 Series: 16 x 5 BNC female
Nominal level 1V p-p for Y of component video and S-video, and for composite video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels Analog: 0.5V to 2.0V p-p
Impedance 75 ohms
Return loss -30dB @ 5 MHz
Maximum DC offset 1.5V
Video output
Number/signal type 4, 8, or 16 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video,
S-video, composite video
Connectors 84/124 Series: 4 x 5 BNC female
88/128 Series: 8 x 5 BNC female
168 Series: 8 x 5 BNC female
1616 Series: 16 x 5 BNC female
Nominal level 1V p-p for Y of component video and S-video, and for composite video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum level 2V p-p
Impedance 75 ohms
Return loss -30dB @ 5 MHz
DC offset ±5mV maximum with input at 0 offset
Sync
Input type RGBHV, RGBS, RGsB, RsGsBs
Output type RGBHV, RGBS, RGsB, RsGsBs
Input level 0.5V to 5.0V p-p,: 4.0V p-p normal
Output level AGC to TTL: 4V to 5V p-p, unterminated
Input impedance
     84/88/124/128 Series All inputs: 510 ohms
     168/1616 Series Inputs 1, 3, 5, 7: 75 or 510 ohms, switchable
Inputs 2, 4, 6, 8, and 9 through 16: 510 ohms
Output impedance 75 ohms
Polarity Positive or negative (follows input)
Audio — audio models only
Routing 84 Series: 8 x 4 stereo matrix
88 Series: 8 x 8 stereo matrix
124 Series: 12 x 4 stereo matrix
128 Series: 12 x 8 stereo matrix
168 Series: 16 x 8 stereo matrix
1616 Series: 16 x 16 stereo matrix
Gain Unbalanced output: 0dB; balanced output: +6dB
Frequency response 20 Hz to 20 kHz, ±0.05dB
THD + Noise 0.03% @ 1 kHz at rated nominal level
S/N >90dB, balanced, at rated maximum output (21dBu)
Crosstalk <-80dB @ 1 kHz, fully loaded
Stereo channel separation >80dB @ 1 kHz
CMRR >75dB @: 20 Hz to 20 kHz
Audio input — audio models only
Number/signal type 8, 12, or 16 stereo, balanced/unbalanced
Connectors (8, 12, or 16) 3.5 mm captive screw connectors, 5 pole
Impedance >10 kohms unbalanced/balanced, DC coupled
Nominal level -10dBV (316mV)
Maximum level +19.5dBu, (balanced or unbalanced) at 1%THD+N
Input gain adjustment -15dB to +9dB, adjustable per input by RS-232 or
front panel
Audio output — audio models only
Number/signal type 4, 8, or 16: stereo, balanced/unbalanced
Connectors (4, 8, or 16) 3.5 mm captive screw connectors, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.1dB channel to channel
Maximum level (Hi-Z) >+21dBu, balanced or unbalanced at stated %THD+N
Maximum level (600 ohm) >+15dBm, balanced or unbalanced at
stated %THD+N
Control/remote — switcher
Serial control port 1 RS-232 or RS-422, 9-pin female D connector
Baud rate and protocol 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations 2 = TX, 3 = RX, 5 = GND
Program control Extron's control program for Windows®
Extron's Simple Instruction Set™ _ SIS™
General
Power 100VAC to 240VAC, 50/60 Hz, internal, auto-switchable
     84/88/124/128 Series 30 watts
     168/1616 Series 36 watts
Temperature/humidity Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +104°F (0° to +40°C) / 10% to 90%, non-condensing
Rack mount Yes, with included parts
Enclosure type Metal
Enclosure dimensions
     84/88/124/128 Series 5.25" H x 17.0" W x 9.4" D: (3U high, full rack width)
(13.3 cm H x 43.2 cm W x 23.9 cm D)
(Depth excludes connectors.: Width excludes rack ears.)
     168/1616 Series 10.5" H x 17.0" W x 9.7" D: (6U high, full rack width)
(26.7 cm H x 43.2 cm W x 24.6 cm D)
(Depth excludes connectors.: Width excludes rack ears.)
Product weight
     CrossPoint 84/88/124/128 14.8 lbs (6.7 kg)
     CrossPoint 168/1616 Series 19.4 lbs (8.8 kg)
Shipping weight
     CrossPoint 84/88/124/128 21 lbs (9.5 kg)
DIM weight: 25
     CrossPoint 168/1616 26 lbs (11.8 kg)
DIM weight: 34
Vibration ISTA/NSTA 1A in carton (International Safe
Transit Association)
Listings UL, CUL
Compliances CE, FCC Class A
MTBF 30,000 hours
Warranty 3 years parts and labor
(7.40-121802-D3)