- 450 MHz (-3dB) video bandwidth, fully loaded – Ensures switching and distribution of most signals without degradation. The 450 MHz (-3dB) rating is a worst case specification; i.e., the MSV0502 models provide 450 MHz (-3dB) at full performance capacity— when one input signal drives both outputs.
- Audio breakaway - The MSV0502 matrix switchers provide the capability to break away an audio signal from its corresponding video signal. Audio breakaway switching can be done via front panel control or RS-232 control
- Front panel - Ergonomic design featuring soft-touch buttons and integrated labeling system.
- 32 global presets - These store commonly used switching configurations. Presets may be recalled from the front panel or RS-232 control. When a preset is recalled, all the new I/O connections occur simultaneously.
- Balanced and unbalanced audio - Accepts both balanced and unbalanced stereo audio signals on captive screw connectors.
- Individual audio input trim levels
- Audio output volume adjustment and muting – Each individual output has volume control adjustment via the front panel or RS-232, RS422, and RS-485 control. Audio output levels can be set dynamically at different levels to feed the audio amplifier, thus eliminating the need for a preamplifier.
- Blank button - Allows the video and audio input sources to be disconnected from the output. Blank only affects the currently selected output (the other output remains unchanged).
- Power outputs (MSV0502-3 only) - Four 12VDC auxiliary power outputs provide up to four amps total current to power interfaces, line drivers or other equipment
- RS-232, RS-422, and RS-485 control - A rear panel RS-232, RS-422, and RS485 control port provides connection of the MSV0502 to a third party control system.
- ICS100 control software - Offers an intuitive graphical interface for effortless control of all matrix switcher functions using a PC.
- IR Remote Control - Input/output selection, volume and mute can be controlled remotely via infrared commands using the optional CTL120-2 infrared remote control or a third-party control system with infrared emitters.
- Rack-mountable - The MSV0502 matrix switchers are rack-mountable in any conventional 19-inch rack using the included rack ears.
|
)
Printable Version
