 PART NUMBERS
|
 |
|||||||||||||||||
The MSV0502-2, MSV0502-3 and MSV0502-4 all offer high quality signal routing for stereo audio signals. These matrix switchers are compatible with balanced or unbalanced line level audio signals. By wiring the inputs and outputs appropriately, unbalanced input signals can be output as balanced audio and vice versa. Unique gain trim levels can be adjusted and stored for each input, helping to standardize signal levels among various types of audio sources. Each output offers variable audio output level and mute capability that can be controlled locally using the front panel Volume and Mute buttons, remotely via serial commands, or using the optional Inline CTL120-2 IR remote control. Left/right balance can also be adjusted as required using serial commands.
Featuring 32 global presets, the MSV0502 can store frequently used configurations and then quickly recall them using just two button presses. Seven memory settings are available from the front panel and all 32 memories are available via serial commands. The memories store all input and output patches, as well as the current audio level for each output. The configuration memories make it easy to set up complex switching arrangements in advance, then recall them quickly and reliably during a show or presentation.
The ICS100 Inline Control Software included with the MSV0502 offers an intuitive graphical interface for effortless control of all matrix switcher functions using a PC.
| Video | |
|---|---|
| Routing | |
| MSV0502 | 5 x 2 matrix |
| MSV0804 | 8 x 4 matrix |
| Gain | Unity |
| Bandwidth | 450 MHz (-3dB), fully loaded |
| 0 MHz to 10 MHz: no more than +0.1dB to -0.1dB | |
| 0 MHz to 130 MHz: no more than +4.5dB to -0.dB | |
| Crosstalk | -80dB @ 10 MHz |
| Switching speed | 400 ns (max.) |
| Video input | |
| Number/signal type | 8 RGBHV, RGBS, RGsB, RsGsBs, component video (Y, R-Y, B-Y) |
| Connectors | |
| MSV0502 | 5 female 15-pin HD |
| MSV0804 | 8 female 15-pin HD |
| Nominal level | 1V p-p for Y of component video |
| 0.7V p-p for RGB | |
| 0.3V p-p for R-Y and B-Y of component video | |
| Minimum/maximum levels | Analog:: 0.6V to 1.8V p-p including offset |
| Impedance | 75 ohms |
| Return loss | <-40dB @ 5 MHz |
| Maximum DC offset | ±0.5VDC |
| Video output | |
| Number/signal type | 4 RGBHV, RGBS, RGsB, RsGsBs, component video (Y, R-Y, B-Y) |
| Connectors | |
| MSV0502 | 2 female 15-pin HD |
| MSV0804 | 4 female 15-pin HD |
| Nominal level | 1V p-p for Y of component video |
| 0.7V p-p for RGB | |
| 0.3V p-p for R-Y and B-Y of component video | |
| Minimum/maximum levels | 0.6V to 1.8V p-p |
| Impedance | 75 ohms |
| Return loss | <-45dB @ 5 MHz |
| DC offset | ±8.5mV maximum with input at 0 offset |
| Sync | |
| Input type | RGBHV, RGBS, RGsB, RsGsBs |
| Output type | RGBHV, RGBS, RGsB, RsGsBs |
| Input level | 2.0V to 5.5V p-p |
| Output level | 4.0V to 5.5V p-p, unterminated |
| Input impedance | 510 ohms |
| Output impedance | 75 ohms |
| Max input voltage | 5.0V p-p |
| Max. propagation delay | 600 ns |
| Max. rise/fall time | 600 ns |
| Polarity | Positive or negative (follows input) |
| Audio | |
| Routing | |
| MSV0502 | 5 x 2 stereo matrix |
| MSV0804 | 8 x 4 stereo matrix |
| Gain: Unbalanced output: 0dB; balanced output: +6dB | |
| Frequency response | 20 Hz to 20 kHz, ±0.05dB; 10 Hz to 175 kHz, -3dB |
| THD + Noise | 0.02% @ 1 kHz at nominal level |
| S/N | >74dB at maximum output |
| Crosstalk | <-70dB @ 1 kHz, fully loaded |
| Stereo channel separation | >76dB @ 1 kHz |
| CMRR | >81dB @ 20 Hz to 20 kHz |
| Audio input | |
| Number/signal type | |
| MSV0502 | 5 stereo, balanced/unbalanced |
| MSV0804 | 8 stereo, balanced/unbalanced |
| Connectors | |
| MSV0502 | (5) 3.5 mm captive screw connectors, 5 pole |
| MSV0804 | (8) 3.5 mm captive screw connectors, 5 pole |
| Impedance | >20 kohms unbalanced, 1 kohm balanced, DC coupled |
| Nominal level | -10dBV (316mV) |
| Maximum level | +16dBu, (balanced or unbalanced) at 1%THD+N |
| Input gain adjustment | -55dB to 0dB, adjustable per input |
| Audio output | |
| Number/signal type | |
| MSV0502 | 2 stereo, balanced/unbalanced |
| MSV0804 | 4 stereo, balanced/unbalanced |
| Connectors | |
| MSV0502 | (2) 3.5 mm captive screw connectors, 5 pole |
| MSV0804 | (4) 3.5 mm captive screw connectors, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1dB channel to channel |
| Maximum level (Hi-Z) | >+22dBu, balanced or unbalanced at 1%THD+N |
| Maximum level (600 ohm) | >+16dBm, balanced or unbalanced at 1%THD+N |
| 0dBu = 0.775 volts (RMS). | |
| Control/remote — switcher | |
| Serial control port | RS-232, RS-422, or RS 485; 3.5 mm 5-pole captive screw connector |
| Baud rate and protocol | 1200, 2400, 4800, 9600, 19200, or 38400 baud; 8-bit, 1 stop bit, no parity |
| Serial control pin configurations | 1 = GND, 2 = TX-, 3 = TX+, 4 = RX-, 5 = RX+ |
| IR controller module | CTL 120-2 |
| Program control | lCS100 (Inline Control Software) |
| General | |
| Power | 100VAC to 240VAC, 50/60 Hz, 19 watts, internal, autoswitchable |
| Temperature/humidity | Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing |
| Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing | |
| Rack mount | Yes, with included brackets, part #MTR102-1 |
| Enclosure type | Metal |
| Enclosure dimensions | |
| MSV0502 | 1.8" H x 17.0" W x 11.4" D (1U high, full rack width) |
| 4.6 cm H x 43.2 cm W x 29.0 cm D | |
| (Depth excludes connectors.: Width excludes rack ears.) | |
| MSV0804 | 3.5" H x 17.0" W x 11.4" D (2U high, full rack width) |
| 8.9 cm H x 43.2 cm W x 29.0 cm D | |
| (Depth excludes connectors.: Width excludes rack ears.) | |
© 2003 Extron Electronics. Specifications are subject to change without notice.