MSV0502
5x2 VGA and Stereo Audio Matrix Switcher

The Inline MSV0502 is a compact 5x2 VGA and Stereo Audio Matrix Switcher that is compatible with RGBHV, RGBS, RGsB, and component video signals.

PART NUMBERS
  5x2 VGA Matrix Switcher: VGA Only (15-Pin HD Female) MSV0502-1
  5x2 VGA Matrix Switcher: VGA (15-Pin HD Female) and Balanced / Unbalanced Stereo Audio MSV0502-2
  5x2 VGA Matrix Switcher: VGA (15-Pin HD Female) and Balanced / Unbalanced Stereo Audio with (4) Aux DC Power Outputs MSV0502-3
  5x2 Matrix Switcher: Balanced / Unbalanced Stereo Audio Only MSV0502-4
  Click to view enlarged image.
Click to enlarge image
Printable Version

 Overview   Description   Features 
 Specifications 
 Diagram   Panel Drawing 
 

Video
Routing
     MSV0502 5 x 2 matrix
     MSV0804 8 x 4 matrix
Gain Unity
Bandwidth 450 MHz (-3dB), fully loaded
0 MHz to 10 MHz: no more than +0.1dB to -0.1dB
0 MHz to 130 MHz: no more than +4.5dB to -0.dB
Crosstalk -80dB @ 10 MHz
Switching speed 400 ns (max.)
Video input
Number/signal type 8 RGBHV, RGBS, RGsB, RsGsBs, component video (Y, R-Y, B-Y)
Connectors
     MSV0502 5 female 15-pin HD
     MSV0804 8 female 15-pin HD
Nominal level 1V p-p for Y of component video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video
Minimum/maximum levels Analog:: 0.6V to 1.8V p-p including offset
Impedance 75 ohms
Return loss <-40dB @ 5 MHz
Maximum DC offset ±0.5VDC
Video output
Number/signal type 4 RGBHV, RGBS, RGsB, RsGsBs, component video (Y, R-Y, B-Y)
Connectors
     MSV0502 2 female 15-pin HD
     MSV0804 4 female 15-pin HD
Nominal level 1V p-p for Y of component video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video
Minimum/maximum levels 0.6V to 1.8V p-p
Impedance 75 ohms
Return loss <-45dB @ 5 MHz
DC offset ±8.5mV maximum with input at 0 offset
Sync
Input type RGBHV, RGBS, RGsB, RsGsBs
Output type RGBHV, RGBS, RGsB, RsGsBs
Input level 2.0V to 5.5V p-p
Output level 4.0V to 5.5V p-p, unterminated
Input impedance 510 ohms
Output impedance 75 ohms
Max input voltage 5.0V p-p
Max. propagation delay 600 ns
Max. rise/fall time 600 ns
Polarity Positive or negative (follows input)
Audio
Routing
     MSV0502 5 x 2 stereo matrix
     MSV0804 8 x 4 stereo matrix
Gain: Unbalanced output: 0dB; balanced output: +6dB
Frequency response 20 Hz to 20 kHz, ±0.05dB; 10 Hz to 175 kHz, -3dB
THD + Noise 0.02% @ 1 kHz at nominal level
S/N >74dB at maximum output
Crosstalk <-70dB @ 1 kHz, fully loaded
Stereo channel separation >76dB @ 1 kHz
CMRR >81dB @ 20 Hz to 20 kHz
Audio input
Number/signal type
     MSV0502 5 stereo, balanced/unbalanced
     MSV0804 8 stereo, balanced/unbalanced
Connectors
     MSV0502 (5) 3.5 mm captive screw connectors, 5 pole
     MSV0804 (8) 3.5 mm captive screw connectors, 5 pole
Impedance >20 kohms unbalanced, 1 kohm balanced, DC coupled
Nominal level -10dBV (316mV)
Maximum level +16dBu, (balanced or unbalanced) at 1%THD+N
Input gain adjustment -55dB to 0dB, adjustable per input
Audio output
Number/signal type
     MSV0502 2 stereo, balanced/unbalanced
     MSV0804 4 stereo, balanced/unbalanced
Connectors
     MSV0502 (2) 3.5 mm captive screw connectors, 5 pole
     MSV0804 (4) 3.5 mm captive screw connectors, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.1dB channel to channel
Maximum level (Hi-Z) >+22dBu, balanced or unbalanced at 1%THD+N
Maximum level (600 ohm) >+16dBm, balanced or unbalanced at 1%THD+N
 0dBu = 0.775 volts (RMS).
Control/remote — switcher
Serial control port RS-232, RS-422, or RS 485; 3.5 mm 5-pole captive screw connector
Baud rate and protocol 1200, 2400, 4800, 9600, 19200, or 38400 baud; 8-bit, 1 stop bit, no parity
Serial control pin configurations 1 = GND, 2 = TX-, 3 = TX+, 4 = RX-, 5 = RX+
IR controller module CTL 120-2
Program control lCS100 (Inline Control Software)
General
Power 100VAC to 240VAC, 50/60 Hz, 19 watts, internal, autoswitchable
Temperature/humidity Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount Yes, with included brackets, part #MTR102-1
Enclosure type Metal
Enclosure dimensions
     MSV0502 1.8" H x 17.0" W x 11.4" D (1U high, full rack width)
4.6 cm H x 43.2 cm W x 29.0 cm D
(Depth excludes connectors.: Width excludes rack ears.)
     MSV0804 3.5" H x 17.0" W x 11.4" D (2U high, full rack width)
8.9 cm H x 43.2 cm W x 29.0 cm D
(Depth excludes connectors.: Width excludes rack ears.)